The DUT250VG is a compact and heavy duty Type 1+2+3 SPD, designed to be connected at the entrance of the electrical installation, on a 3-phase 230/400 V AC network. The Spark gap + Varistor technology allows a very low level of protection and an absence of following current. The DUT250VG is a 3-phase SPD and provides a common and differential mode protection. This SPD is built in a compact enclosure for DIN rail mounting.
- Type 1+2+3, 3-phase surge protector
- Common and differential mode
- Very compact monobloc enclosure
- Iimp by pole/total : 25kA
- Internal disconnection, status indicator
- Optimized to TOV
- EN 61643-11, IEC 61643-11 and UL1449 ed.4 compliance
SPD type
|
1+2+3 | |
Network
|
230/400 V 3-phase | |
AC system
|
TNC | |
Nominal line voltage
|
Un | 230/400 Vac |
Max. AC operating voltage
|
Uc | 255 Vac |
Temporary Over Voltage (TOV) Charasteristics - 5 sec.
Without disconnection
|
UT | 335 Vac withstand |
Temporary Over Voltage (TOV) Charasteristics - 120 mn
Without disconnection or with safety disconnection
|
UT | 440 Vac withstand |
Residual Current
Leakage current to Ground
|
Ipe | None |
Follow current
|
If | None |
Nominal discharge current
15 x 8/20 µs impulses
|
In | 40 kA |
Max. discharge current
max. withstand @ 8/20 µs by pole
|
Imax | 100 kA |
Impulse current by pole
max. withstand 10/350µs by pole
|
Iimp | 25 kA |
Total lightning current
max. total withstand @ 10/350µs
|
Itotal | 75 kA |
Withstand on Combination waveform IEC 61643-11
Class III test: 1.2/50µs - 8/20µs
|
Uoc | 6 kV |
Withstand on overvoltages IEEE C62.41.1
|
20 kV | |
Specific energy by pole
max. withstand 10/350 µs
|
W/R | 156 kJ/ohm |
Connection mode(s)
|
L/PEN | |
Protection mode(s)
|
Common mode/Differential mode | |
Protection level L/PE
@ In (8/20µs)
|
Up L/PE | 1.5 kV |
Admissible short-circuit current
|
Isccr | 50 000 A |
Download
Catalog sheet DUT250VG-300/TNC (pdf, 171.6 kB)